\n
![\"\"](\"https:\/\/killmud.wpengine.com\/wp-content\/uploads\/2017\/04\/1-1-300x120.jpg\")
Kill Mud and Chemicals, LLC produces high quality weighted Kill and Workover fluids for the Oil and Gas\u00a0Industry. Only industry standard products are utilized in the formulation of these fluids and are blended\u00a0in our plant located in Denver City, TX. Kill Mud and Chemicals operates 24 hours a day, seven days a\u00a0week to accommodate our customer\u2019s needs. Our plant services the Permian Basin of West Texas\u00a0including the areas of Midland, Odessa, and Lubbock in Texas, and Hobbs, Carlsbad and Artesia in New\u00a0Mexico.<\/h4>\nIt is our policy that before we load fluid into any truck, it must be completely empty of fluid and or dirty solids.\u00a0This includes all plumbing and belly lines to ensure that no dilution or contamination of KM&C fluid occurs. If\u00a0there is fluid in the truck prior to loading, then the mud plant operator will send the truck to a disposal facility to\u00a0empty its contents before any KM&C fluid is loaded into the truck for transport to the well site. Cost for the\u00a0disposal will be billed to the trucking company. It is recommended that the customer notify the trucking company\u00a0of this policy before they arrive at the KM&C plant.<\/h4>\nMark Cox<\/em>
\nDirector, Kill Mud & Chemicals, LLC<\/h4>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”policies” background_color=”#1c1c1c”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\nRecondition & Buy Back Policies<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nRecondition Policy:<\/b><\/span><\/h4>\nWeighted Kill Fluid originating from our plant can be reconditioned to the customers specification. Cost\u00a0for the reconditioning of kill fluid is based on the cost of consumables plus plant operating cost. Contact\u00a0us for more details on these cost.<\/h4>\nBuy<\/b><\/span> Back Credit <\/b><\/span>Policy:<\/b><\/span><\/h4>\nBuy<\/span> back<\/span> of <\/span>used<\/span> weighted kill<\/span> fluid originating from our plant will<\/b><\/span> <\/b>be<\/span> credited <\/span>for 50%<\/b><\/span> of <\/span>the<\/span> volume<\/span> returned,<\/span> at the <\/span>returned<\/span> kill <\/span>weight value.\u00a0 <\/span>The buy back credit only applies to KM&C weighted kill fluid.<\/span> Mud shipped to drilling rigs cannot be returned for credit<\/b><\/span>.\u00a0 <\/span>Several conditions<\/span> must<\/span> be<\/span> met for <\/span>the<\/span>buy<\/span> back<\/span> credit<\/span> option.<\/span> These<\/span> conditions<\/span> are<\/span> listed below.<\/span><\/h4>\nReturned<\/span> kill <\/span>fluid <\/span>must<\/span> weigh <\/span>at least 11.0 <\/span>ppg <\/span>or more.\u00a0 <\/span>An exception to this criteria will be made when the originally ordered kill weight is less than 11.0 ppg.\u00a0 <\/span>In this situation, 10.0 ppg will be the cutoff criteria.<\/span><\/h4>\nExcessive <\/span>contamination <\/span>from<\/span> downhole <\/span>fluids<\/span> such as oil, formation<\/span> water, cement, frac <\/span>sand,<\/span> red<\/span> bed,<\/span> gravel,<\/span> etc., <\/span>will<\/span> not<\/span> be<\/span> eligible<\/span> for <\/span>buy<\/span> back.<\/span> The<\/span>plant<\/span> operator <\/span>will<\/span> determine<\/span> if the <\/span>fluid<\/span> meets<\/span> the <\/span>buy<\/span> back<\/span> criteria.<\/span><\/h4>\nIn addition to weighted kill fluid, KM&C offers a variety of workover fluids and additives.\u00a0\u00a0<\/span><\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”fluid”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\nKM&C Fluid Products<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\n![\"\"](\"https:\/\/killmud.wpengine.com\/wp-content\/uploads\/2017\/04\/tank.jpg\")
Mud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Mark Cox<\/em>
\nDirector, Kill Mud & Chemicals, LLC<\/h4>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”policies” background_color=”#1c1c1c”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\nRecondition & Buy Back Policies<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nRecondition Policy:<\/b><\/span><\/h4>\nWeighted Kill Fluid originating from our plant can be reconditioned to the customers specification. Cost\u00a0for the reconditioning of kill fluid is based on the cost of consumables plus plant operating cost. Contact\u00a0us for more details on these cost.<\/h4>\nBuy<\/b><\/span> Back Credit <\/b><\/span>Policy:<\/b><\/span><\/h4>\nBuy<\/span> back<\/span> of <\/span>used<\/span> weighted kill<\/span> fluid originating from our plant will<\/b><\/span> <\/b>be<\/span> credited <\/span>for 50%<\/b><\/span> of <\/span>the<\/span> volume<\/span> returned,<\/span> at the <\/span>returned<\/span> kill <\/span>weight value.\u00a0 <\/span>The buy back credit only applies to KM&C weighted kill fluid.<\/span> Mud shipped to drilling rigs cannot be returned for credit<\/b><\/span>.\u00a0 <\/span>Several conditions<\/span> must<\/span> be<\/span> met for <\/span>the<\/span>buy<\/span> back<\/span> credit<\/span> option.<\/span> These<\/span> conditions<\/span> are<\/span> listed below.<\/span><\/h4>\nReturned<\/span> kill <\/span>fluid <\/span>must<\/span> weigh <\/span>at least 11.0 <\/span>ppg <\/span>or more.\u00a0 <\/span>An exception to this criteria will be made when the originally ordered kill weight is less than 11.0 ppg.\u00a0 <\/span>In this situation, 10.0 ppg will be the cutoff criteria.<\/span><\/h4>\nExcessive <\/span>contamination <\/span>from<\/span> downhole <\/span>fluids<\/span> such as oil, formation<\/span> water, cement, frac <\/span>sand,<\/span> red<\/span> bed,<\/span> gravel,<\/span> etc., <\/span>will<\/span> not<\/span> be<\/span> eligible<\/span> for <\/span>buy<\/span> back.<\/span> The<\/span>plant<\/span> operator <\/span>will<\/span> determine<\/span> if the <\/span>fluid<\/span> meets<\/span> the <\/span>buy<\/span> back<\/span> criteria.<\/span><\/h4>\nIn addition to weighted kill fluid, KM&C offers a variety of workover fluids and additives.\u00a0\u00a0<\/span><\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”fluid”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\nKM&C Fluid Products<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
\nRecondition & Buy Back Policies<\/span><\/h1>\n<\/div>\n
Recondition & Buy Back Policies<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nRecondition Policy:<\/b><\/span><\/h4>\nWeighted Kill Fluid originating from our plant can be reconditioned to the customers specification. Cost\u00a0for the reconditioning of kill fluid is based on the cost of consumables plus plant operating cost. Contact\u00a0us for more details on these cost.<\/h4>\nBuy<\/b><\/span> Back Credit <\/b><\/span>Policy:<\/b><\/span><\/h4>\nBuy<\/span> back<\/span> of <\/span>used<\/span> weighted kill<\/span> fluid originating from our plant will<\/b><\/span> <\/b>be<\/span> credited <\/span>for 50%<\/b><\/span> of <\/span>the<\/span> volume<\/span> returned,<\/span> at the <\/span>returned<\/span> kill <\/span>weight value.\u00a0 <\/span>The buy back credit only applies to KM&C weighted kill fluid.<\/span> Mud shipped to drilling rigs cannot be returned for credit<\/b><\/span>.\u00a0 <\/span>Several conditions<\/span> must<\/span> be<\/span> met for <\/span>the<\/span>buy<\/span> back<\/span> credit<\/span> option.<\/span> These<\/span> conditions<\/span> are<\/span> listed below.<\/span><\/h4>\nReturned<\/span> kill <\/span>fluid <\/span>must<\/span> weigh <\/span>at least 11.0 <\/span>ppg <\/span>or more.\u00a0 <\/span>An exception to this criteria will be made when the originally ordered kill weight is less than 11.0 ppg.\u00a0 <\/span>In this situation, 10.0 ppg will be the cutoff criteria.<\/span><\/h4>\nExcessive <\/span>contamination <\/span>from<\/span> downhole <\/span>fluids<\/span> such as oil, formation<\/span> water, cement, frac <\/span>sand,<\/span> red<\/span> bed,<\/span> gravel,<\/span> etc., <\/span>will<\/span> not<\/span> be<\/span> eligible<\/span> for <\/span>buy<\/span> back.<\/span> The<\/span>plant<\/span> operator <\/span>will<\/span> determine<\/span> if the <\/span>fluid<\/span> meets<\/span> the <\/span>buy<\/span> back<\/span> criteria.<\/span><\/h4>\nIn addition to weighted kill fluid, KM&C offers a variety of workover fluids and additives.\u00a0\u00a0<\/span><\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”fluid”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\nKM&C Fluid Products<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
\n
\nRecondition Policy:<\/b><\/span><\/h4>\n
Recondition Policy:<\/b><\/span><\/h4>\nWeighted Kill Fluid originating from our plant can be reconditioned to the customers specification. Cost\u00a0for the reconditioning of kill fluid is based on the cost of consumables plus plant operating cost. Contact\u00a0us for more details on these cost.<\/h4>\nBuy<\/b><\/span> Back Credit <\/b><\/span>Policy:<\/b><\/span><\/h4>\nBuy<\/span> back<\/span> of <\/span>used<\/span> weighted kill<\/span> fluid originating from our plant will<\/b><\/span> <\/b>be<\/span> credited <\/span>for 50%<\/b><\/span> of <\/span>the<\/span> volume<\/span> returned,<\/span> at the <\/span>returned<\/span> kill <\/span>weight value.\u00a0 <\/span>The buy back credit only applies to KM&C weighted kill fluid.<\/span> Mud shipped to drilling rigs cannot be returned for credit<\/b><\/span>.\u00a0 <\/span>Several conditions<\/span> must<\/span> be<\/span> met for <\/span>the<\/span>buy<\/span> back<\/span> credit<\/span> option.<\/span> These<\/span> conditions<\/span> are<\/span> listed below.<\/span><\/h4>\nReturned<\/span> kill <\/span>fluid <\/span>must<\/span> weigh <\/span>at least 11.0 <\/span>ppg <\/span>or more.\u00a0 <\/span>An exception to this criteria will be made when the originally ordered kill weight is less than 11.0 ppg.\u00a0 <\/span>In this situation, 10.0 ppg will be the cutoff criteria.<\/span><\/h4>\nExcessive <\/span>contamination <\/span>from<\/span> downhole <\/span>fluids<\/span> such as oil, formation<\/span> water, cement, frac <\/span>sand,<\/span> red<\/span> bed,<\/span> gravel,<\/span> etc., <\/span>will<\/span> not<\/span> be<\/span> eligible<\/span> for <\/span>buy<\/span> back.<\/span> The<\/span>plant<\/span> operator <\/span>will<\/span> determine<\/span> if the <\/span>fluid<\/span> meets<\/span> the <\/span>buy<\/span> back<\/span> criteria.<\/span><\/h4>\nIn addition to weighted kill fluid, KM&C offers a variety of workover fluids and additives.\u00a0\u00a0<\/span><\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”fluid”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\nKM&C Fluid Products<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Buy<\/b><\/span> Back Credit <\/b><\/span>Policy:<\/b><\/span><\/h4>\nBuy<\/span> back<\/span> of <\/span>used<\/span> weighted kill<\/span> fluid originating from our plant will<\/b><\/span> <\/b>be<\/span> credited <\/span>for 50%<\/b><\/span> of <\/span>the<\/span> volume<\/span> returned,<\/span> at the <\/span>returned<\/span> kill <\/span>weight value.\u00a0 <\/span>The buy back credit only applies to KM&C weighted kill fluid.<\/span> Mud shipped to drilling rigs cannot be returned for credit<\/b><\/span>.\u00a0 <\/span>Several conditions<\/span> must<\/span> be<\/span> met for <\/span>the<\/span>buy<\/span> back<\/span> credit<\/span> option.<\/span> These<\/span> conditions<\/span> are<\/span> listed below.<\/span><\/h4>\nReturned<\/span> kill <\/span>fluid <\/span>must<\/span> weigh <\/span>at least 11.0 <\/span>ppg <\/span>or more.\u00a0 <\/span>An exception to this criteria will be made when the originally ordered kill weight is less than 11.0 ppg.\u00a0 <\/span>In this situation, 10.0 ppg will be the cutoff criteria.<\/span><\/h4>\nExcessive <\/span>contamination <\/span>from<\/span> downhole <\/span>fluids<\/span> such as oil, formation<\/span> water, cement, frac <\/span>sand,<\/span> red<\/span> bed,<\/span> gravel,<\/span> etc., <\/span>will<\/span> not<\/span> be<\/span> eligible<\/span> for <\/span>buy<\/span> back.<\/span> The<\/span>plant<\/span> operator <\/span>will<\/span> determine<\/span> if the <\/span>fluid<\/span> meets<\/span> the <\/span>buy<\/span> back<\/span> criteria.<\/span><\/h4>\nIn addition to weighted kill fluid, KM&C offers a variety of workover fluids and additives.\u00a0\u00a0<\/span><\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”fluid”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\nKM&C Fluid Products<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Returned<\/span> kill <\/span>fluid <\/span>must<\/span> weigh <\/span>at least 11.0 <\/span>ppg <\/span>or more.\u00a0 <\/span>An exception to this criteria will be made when the originally ordered kill weight is less than 11.0 ppg.\u00a0 <\/span>In this situation, 10.0 ppg will be the cutoff criteria.<\/span><\/h4>\nExcessive <\/span>contamination <\/span>from<\/span> downhole <\/span>fluids<\/span> such as oil, formation<\/span> water, cement, frac <\/span>sand,<\/span> red<\/span> bed,<\/span> gravel,<\/span> etc., <\/span>will<\/span> not<\/span> be<\/span> eligible<\/span> for <\/span>buy<\/span> back.<\/span> The<\/span>plant<\/span> operator <\/span>will<\/span> determine<\/span> if the <\/span>fluid<\/span> meets<\/span> the <\/span>buy<\/span> back<\/span> criteria.<\/span><\/h4>\nIn addition to weighted kill fluid, KM&C offers a variety of workover fluids and additives.\u00a0\u00a0<\/span><\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”fluid”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\nKM&C Fluid Products<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
In addition to weighted kill fluid, KM&C offers a variety of workover fluids and additives.\u00a0\u00a0<\/span><\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”fluid”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\nKM&C Fluid Products<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
\n
\nKM&C Fluid Products<\/span><\/h1>\n<\/div>\n
KM&C Fluid Products<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
\n
\nWeighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\n
Weighted Kill Fluids<\/i><\/b><\/span>:<\/b><\/span><\/h4>\nKM&C weighted kill fluids consist of two basic types, depending on the weight (ppg) required to control and balance the pressure in the well.\u00a0 <\/span>These \u201cmud\u201d types are summarized below.\u00a0 <\/span>The base fluid to produce these muds begins with 10.0 ppg NaCl bine.\u00a0 <\/span>The brine is blended with XCD Polymer (Xanthan gum) in the polymer hydration tank to produce a smooth consistent base fluid prior to adding any weighting agents.\u00a0 <\/span>XCD Polymer (high molecular weight xanthan gum biopolymer) acts as a viscosifier, and has superb suspension properties for weighting agents.<\/span><\/h4>\nCalcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Calcium Carbonate Kill Fluid (White Mud)<\/b><\/span><\/h4>\nCaCO<\/b><\/span>3 <\/sub><\/b><\/span><\/b>Utilized as weighting agent when building kill mud from <\/span>10.1 ppg up to 14.9 ppg<\/span>.\u00a0 <\/span>We utilize Hubercarb M200 high purity limestone, crushed and pulverized to a -60 mesh particle size.\u00a0 <\/span>The carbonate powder is then mixed into the polymerized brine in the mud mixing pit and blended (rolled) until the desired weight of the fluid is obtained.\u00a0 <\/span>To ensure the proper fluid weight is maintained, the plant operator will continue to roll the fluid and check the weight until a smooth consistent fluid is obtained before loading the fluid into transport trucks.\u00a0 <\/span>At the customer\u2019s request, Viscosity and Yield Point information of the fluid is available.\u00a0<\/span><\/h4>\nHematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Hematite Kill Fluid (Red Mud)<\/b><\/span><\/h4>\nFe<\/b><\/span>2<\/sub><\/b><\/span>O<\/b><\/span>3<\/sub><\/b><\/span> \u2013 <\/b>Utilized as weighting agent when building kill mud from <\/span>15.0 ppg up to 22.0 ppg<\/span>.\u00a0 <\/span>KM&C utilizes DENSFIL, a high purity hematite ground to a 200 mesh particle size.\u00a0 <\/span>The hematite is mixed into the polymerized brine, utilizing the same process of blending as described above.\u00a0 <\/span>Viscosity and Yield Point information is available on request.\u00a0 <\/span><\/span>Note*<\/b><\/span>;<\/b> at the customer\u2019s request, hematite kill mud can be built up to 24.0 ppg for emergency situations.\u00a0 <\/span>Pumping and circulating these dense fluids over 22.0 ppg may be problematic depending on the limitations of the pumping equipment.\u00a0<\/span><\/h4>\nWorkover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Workover Fluids<\/i>:<\/b><\/span><\/h4>\nKM&C can build specialty fluids for workover and well intervention operations.\u00a0 <\/span>The products available are as follows:<\/span><\/h4>\nGel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Gel Fluids<\/b><\/span> \u2013 <\/b>Gel fluids can be built with either a freshwater or brine water base.\u00a0 <\/span>KM&C utilizes Drispac\u00ae Regular (a Polyanionic cellulose polymer).\u00a0 <\/span>KM&C will custom blend the gel fluid to whatever viscosity the customer requires.\u00a0 <\/span>Gel fluids of this formulation are utilized to control fluid loss, inhibit swelling clays and shale, and has excellent hole flushing characteristics for removal of cleanout or drilled solids.<\/span><\/h4>\nRed Bed Gel<\/b><\/span> \u2013<\/b> Freshwater or brine based gel blended with XCD polymer and MF-55\u00ae (a Polyacrylamide polymer) which has excellent shale and red bed control properties.\u00a0 <\/span>Especially useful in cased-hole wells.\u00a0 <\/span>Limits the influx of red bed type sediments into the well when the casing has been compromised.<\/span><\/h4>\nLo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Lo-Loss Fluid<\/b><\/span> \u2013<\/b> A formulation of freshwater, blended with Guar Bean polymer. Guar Bean polymer is a natural water soluble polysaccharide witch <\/span>acts to minimize fluid loss which can occur in broken or highly permeable geological formations.\u00a0 <\/span>The polymer forms a high viscosity gel which will \u201cplug\u201d excessive permeable zones.\u00a0 <\/span>The polymer has the unique property of \u201cbreaking\u201d down after approximately 24 hours with minimal insoluble residue left behind.\u00a0 <\/span>Lo-Loss is an excellent choice for temporarily limiting fluid loses in producing formations while minimizing formation damage from fluid infiltration.<\/span><\/h4>\nMF-55<\/b><\/span> <\/b>A Polyacrylamide liquid polymer available in 5 gallon pails.\u00a0 <\/span>This polymer can be added on the fly to reverse unit pits.\u00a0 <\/span>MF-55 provides solids control by encapsulating flocculating solids in the well bore resulting in increased solids removal during cleanout or drilling operations.\u00a0<\/span><\/h4>\nPlug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Plug Mud<\/b><\/span> \u2013 <\/b>Meets Texas Railroad Commission requirements. KM&C plug mud is a blend of 10.0 ppg NaCl brine blended with polyanionic polymer.<\/span><\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ admin_label=”section” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”on” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” module_id=”services” background_color=”#1e1e1e”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”dark” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
\n\n\n\n\nAdditional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
\n
\n
\n
\nAdditional Services<\/span><\/h1>\n<\/div>\n
Additional Services<\/span><\/h1>\n<\/div>\n<\/div>\n\n\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
\n
\nKill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\n
Kill Fluid Consultant: <\/b>At the customer\u2019s request, a well site consultant may be provided.\u00a0 <\/span>Duties include calculation of kill weight, calculation of mud volume required, onsite supervision when circulating the kill fluid in and out of the well, and recommendation for actions required if an unexpected kick occurs during the workover process.<\/span><\/h4>\nHot Shot Service:<\/b>\u00a0 <\/span>KM&C will, at the customer\u2019s request, deliver MF-55 pails to the workover location.\u00a0 <\/span>There is no charge for the delivery if the location is within 20 miles of the KM&C Plant.\u00a0 <\/span>If in excess of 20 miles, a $2.00 per mile delivery charge will be added to the order.<\/b><\/span><\/h4>\n<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
<\/h4>\nMud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\n\n\nNOTE*<\/b><\/span><\/h4>\n
Mud Storage Tank:\u00a0<\/b><\/span>KM&C can provide an onsite storage tank for kill fluid.\u00a0 Our tanks are fabricated in house and consist of a skid mounted round horizontal 300 bbl tank.\u00a0 A two inch diameter plastic sight glass tube is attached to the front of the tank for easy volume determination.\u00a0 Our tanks have a roll line for periodic stirring of the mud.\u00a0 The horizontal design results in a much improved ability to get all of the fluid out of the tank at the end of the job.\u00a0 Thus increasing the buy back credit potential and tank clean out cost.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n
<\/div>\n
\n
\n
\n
\n
\n